Bed,Chair and Mattress Raisers

These raisers are designed especially for divan beds and have an optional central support for beds that are joined in the centre or have six wheels for support. Available for either single or double beds, with a choice of two heights.

These sturdy linked chair raisers are width, depth and height adjustable making them suitable for a large range of chairs
and users. Designed for use on dining, fireside and armchairs,
the cup mountings fit any castor or leg up to 50mm (2") in size. Manufactured from coated steel, they are both strong and durable. Adjustable to fit chairs from 545 to 945mm (211/2 to 371/4") taking the diagonal measurement from leg to leg. Supplied folded away for ease of storage, they are quick and easy to assemble.

Raisers made of moulded sleeves to take large or curved chair legs, or armchairs without legs. Weight 4.9kg.

Unique in design and versatility, this modular raiser has been carefully developed using feedback received from Occupational Therapists. Designed to raise chairs, settees and beds equally well. It is discreet when used under furniture but has maximum support giving security and reassurance. Each support pivots on the link bars to ensure a snug fit to the side of the furniture either at the corner or as a central support along the side of the bed supported. The whole unit is height adjustable with simple to use clip on sections, each 20mm (3/4"), giving a wide range of heights. Height without adjusters is 80mm (31/4"). Supplied as individual sections to ensure you have the parts you need to customise the raiser for the job required. For example, to raise an armchair by 115mm (43/4"), you would require two raiser packs, one pack of spreader bars and one pack of height adjusters, leaving you with five spreader bars and four height adjusters for the next chair or bed.

The Ben block can be used to raise the height of a bed, chair
or table. With adjustable openings, the block will fit most furniture legs and using detachable inserts can raise the height 40mm (11/2") to 140mm (51/2"). The inner width can be adjusted from 60mm (21/2") to 90mm (31/2") and locked into position.
These raisers will stay locked around the legs even when the furniture is moved. Height 200mm (8"). Width 110mm (41/2"). Depth 80mm (31/5"). Weight 730g. Supplied as a set of 4 with inserts.

Cleverly designed raisers that can be adjusted in height and are suitable for either round or square legs. The rubber flanges within each raiser lock them in place around the chair leg, which enables the furniture to be moved without the raisers falling off. Raise 25mm (1"), 50mm (2") and 75mm (3"). Available in three sizes to fit chair or bed leg measurements.

Lightweight but extremely strong moulded cones with a broad base and a recess for the chair or bed leg. They have anti-slip pads to hold castors still. Sold in sets of four.

Black lacquered hardwood with strong steel inserts that t between the bed and the castor, by either screw-in or clip-in fixings. Supplied as set of four.

Strong lightweight plastic raisers with large top diameter, giving extra stability and strong steel inserts. Fits between bed and an existing castor with either screw-in or clip-in fixings.
Supplied as a set of four.

A hardwood cube with three 16mm (5/8") recesses of different diameters, to suit different leg widths. Cube height 111mm (43/8"). Height raise 75mm (3"). Maximum diameter of leg 30,
50 or 75mm (11/4, 2 or 3"). Weight 425g each.
Supplied as set of four.


Click to see full product specification

A hardwood cube, with one recess in the top and an additional wooden base for greater stability. Designed specifically for beds. Cube height 178mm (7"). Raise 130mm (5").
Maximum leg diameter 75mm (3"). Base 152mm (6") square.
Weight 750g each. Supplied as set of four.


Click to see full product specification

Moulded sleeves that have plastic inserts to give different height raises to chairs. Integral ns and domed base give a pressure t over the leg. Useful for odd-shaped legs. Supplied as a set of four with inserts. Sleeve height 200mm (8"). Maximum leg diameter 45mm (13/4"). Height raise 75, 100 or 125mm (3, 4 or 5"). Weight 255g each. Supplied as set of four.


Click to see full product specification

Steel sleeves with epoxy coating and an internal platform that raises the height of a chair leg and clamps securely to it.
Height is selected by moving the platform to one of two positions.
A flexible plastic plate protects the leg where the raiser is secured. Supplied as a set of four. Height raise 70 or 95mm (23/4 or 33/4"). Maximum width of leg 40mm (13/4"). Weight 350g each.


Click to see full product specification

Designed by BIME in partnership with occupational therapists, the Handy Jack is a lightweight, easy to use, manual jack. The jack is used to raise and support the weight of a bed or chair so that fitting or removing bed or chair raisers is easier and safer. It is suitable for use on single or double beds, divans or beds with legs. The lever may be adjusted to suit the existing height of the bed base. Range of movement 240mm (91/2"). Weight 1.7kg.


Click to see full product specification

A set of brown epoxy coated metal sleeves with slotted steel straps that link centrally together for additional security.
An internal platform in the sleeves can be easily moved to give three height positions. Suitable for a wide range of chairs with legs or castors. Sleeve height 150mm (6"). Height raise 75,
100 or 125mm (3, 4 or 5"). Max diameter of leg 48mm (17/8"). Overall width adjustment 910mm (353/4"). Weight 3.4kg.


Click to see full product specification

A set of four moulded blocks, linked together by slotted wooden straps for added security. The system is clamped in position with two wing nuts and the height is adjusted by inserting the blocks supplied. Height raise 75, 95 or 114mm (3, 33/4 or 41/2"). Maximum width of leg 70mm (23/4") diameter. Overall width adjustment 432 x 330mm (17 x 13"). Weight 2.5kg.


Click to see full product specification

Similar to the AA3364, this has two sets of two moulded blocks linked together for use with a bed. The blocks have a broad base for stability, and are adjustable in height, using the inserts supplied. Once adjusted, the units are secured with a wing nut. Height raise 64 to 121mm (21/2 to 43/4") in 19mm (3/4") increments. Maximum width of leg 70mm (23/4") diameter. Overall width adjustment 965 to 1422mm (38 to 56"). Weight 3.4kg.


Click to see full product specification

These are suitable where a stronger more permanent raise or where greater heights are required, than can be achieved with most raisers. Four white steel brackets screw to the sides of the bed or chair. A length of wood (not supplied) needs to be secured between each pair, forming two supports. The bracket has a downward facing socket into which a length of wood may be tted to give a leg of required height. Without a wooden leg insert, the raiser gives a rise of 150mm (6"). Weight 6.9kg. Supplied as a set of four.


Click to see full product specification

This raiser screws on to the side and bottom of the bed frame for security, and is especially recommended for modern bed bases. It consists of two coated screw plates linked by a telescopic steel tube to give easy bed width adjustment. The legs are tted with castors that are individually braked. Supplied as a pair, one for each end of the bed. Castor size 50mm (2"). Bed width 840 to 1372mm (33 to 54"). Height raise 110 to 310mm (41/4 to 121/4"). Weight 3.3kg each.


Click to see full product specification

This raiser screws on to the side and bottom of the bed frame for security, and is especially recommended for modern bed bases. It consists of two coated screw plates linked by a telescopic steel tube to give easy bed width adjustment. The legs are tted with castors that are individually braked. Supplied as a pair, one for each end of the bed. Castor size 50mm (2"). Bed width 840 to 1372mm (33 to 54"). Height raise 110 to 310mm (41/4 to 121/4"). Weight 3.3kg each.


Click to see full product specification

Made from thick foam, covered with vapour permeable, wipe
clean fabric. These bumpers are made to fit a variety of cot
sides and are easily fastened in place. Supplied as a pair.
Length 1524mm (60"). Depth 381mm (15"). Weight 1kg each.


Click to see full product specification

These foam pads are covered with a wipe clean vinyl and have
a hook and loop closure along the length to secure them to a range of cot sides. Suitable for most profiling beds. Supplied as a pair, each one 2m (783/4") long. When mounted, they are 390mm (151/4") deep. Weight 2kg each.


Click to see full product specification

This rail is secured by means of two long arms that slip under the mattress. It can be easily removed and disassembled into three pieces for storage. The clip-on nylon cords must be secured around the legs of the bed for safety. It is not to be used for children under the age of eight. Height above base 360mm (141/4"). Width of mattress arms 610mm (24"). Length of side rail 935mm (37"). Weight 2.3kg.


Click to see full product specification