Sock & Stockings

Designed to help individuals with limited strength and mobility pull on vascular stockings. Comfy foam grip handles make it easy to pull and a durable epoxy finish provides a smooth,
no-snag surface. Compact in size and lightweight.
Measures 343mm (131/2") high, 178mm (7") wide between handles and 114mm (41/4") wide at foot insert.

Compact in design, the Dorking Stocking Donner is both stylish and sturdy. Extendable handles enable easy application of stockings and socks for those with limited reach. The hold down handles rotate 90 degrees, creating a more comfortable position for the user whilst applying the stockings. The central column, that holds the stocking, has a small ridge that prevents movement during application. The column also widens at the top, allowing room for the larger calf. Epoxy coated for a smoother surface that reduces the risk of snagging.
Size 310mm (121/4") high, 205mm (8") wide, column height 205mm (8"), column width 125mm (5"), column depth 85mm (31/2"). Height with handles 560mm (22").

Sock application is made easy with this flexible, plastic sock aid. Slits in the plastic core allow it to bend around the heel.
The inside is lined with nylon to reduce friction.
The outside is lined with terry cloth to hold the sock firmly until
it is on the foot. Two pulling tabs with loop handles permit
one-handed application. Hand wash only. Length 230mm (9"). Weight 73g.

A simple, inexpensive device to assist with putting on a stocking or sock especially if bending and reaching to the foot is difcult. It consists of a strong, shaped, exible plastic gutter with long cotton tapes attached to the top. The stocking or sock is fed on to the plastic and held in place with the side notches. The foot is put in the open end of the stocking, which is then pulled over the foot and up the leg using the tapes. Cord length 920mm (36"). Gutter length 229mm (9"). Weight 55g.

A stocking aid which will apply support hosiery quickly and evenly. Grooves catch the compression stocking and prevent it from popping off. Works like a traditional sock aid - just pull the stocking over the shell, insert the foot and pull the cord to bring the hose up onto the leg. Suitable for Class 1 and 2 stockings. Recommended for below knee stockings but may still be suitable for some above knee models.
Small: 130mm wide x 140mm high (51/4 x 51/2").
Large: 150mm wide x 145mm high (6 x 53/4").

Ideal for those who have the use of only one hand or with decreased strength or coordination. The notch in the side of the aid helps to hold the sock or stocking in place while it is applied to the aid. The cord style helps apply longer stockings that go over the calf. The garter style also features a handle that is ideal for those with limited grasp. A wide version is also available for those with larger feet.
Cord Style: Length 255mm (10") width 100mm (4")
Garter Style; Length 255mm (10") width 100mm (4")
Wide Style; Length 255mm (10") width 127mm (5")
Cord style: Length 255mm (10"). Width 100mm (4").
Garter style: Length 255mm (10"). Width 100mm (4").
Wide style: Length 255mm (10"). Width 127mm (5").

Designed to help those with restricted mobility, enabling the user to successfully apply on socks. The Brevetti is also very effective used with stockings. It consists of a plastic collar or gutter for holding the garment at one end, and a plastic shoehorn with a notch for easy sock removal at the other. A coated steel tube connects the two. Length 737mm (29"). Weight 386g.

Comfy and simple to use device that helps individuals pull on socks or stockings. Just place the garment over the flexible plastic core, insert foot and pull the cords two soft, foam handles to bring the garment over the heel and up the leg.
For one-handed use, use the continuous loop cord with foam handle. Four versions available. Core length 240mm (91/2").
Cord length 600mm (24"). Width 100mm (4").


Click to see full product specification

Similar to the Dorking Stocking donner, but with twin columns designed for use with tights. The lightweight frame enables those with less strength in the upper body to apply the tights with ease. Width 380mm (15"), height with handle 560mm (22"), depth 130mm (5").


Click to see full product specification

Compact in design, the Dorking Stocking Donner is both stylish and sturdy. Extendable handles enable easy application of stockings and socks for those with limited reach. The hold down handles rotate 90 degrees, creating a more comfortable position for the user whilst applying the stockings. The central column, that holds the stocking, has a small ridge that prevents movement during application. The column also widens at the top, allowing room for the larger calf. Epoxy coated for a smoother surface that reduces the risk of snagging.
Size 310mm (121/4") high, 205mm (8") wide, column height 205mm (8"), column width 125mm (5"), column depth 85mm (31/2"). Height with handles 560mm (22").


Click to see full product specification

Designed for those with reduced movement in the back, hip or
knee joints. The stocking or sock is placed over the fabric sock aid and via the use of ties the stocking is pulled up the leg.
The sleeve is small and light so can be easily transported.
Available in light green only. Cord length 650mm (251/2").
Length 400mm (153/4"). Weight 96g.


Click to see full product specification

This stocking aid is designed for putting on support stockings of various lengths and types. The large handles make it easier for others to assist the user in application. It can also be used with only one hand. Length 1m (40"). Width 200mm (8"). Weight 90g.


Click to see full product specification

This device which helps the user apply socks and stockings is made up from four moulded plastic parts, ideal for easy storage and transportation.
Each part has a specific use
• The collar or gutter holds the garment
• An extension piece for the middle section
• A handle with a hole to hang the item up by
• A shoehorn with a notch to help with sock or stocking removal
The collar and extension piece interlock and fit onto either the handle or the shoehorn. Length assembled 610mm (24").
Length disassembled 267mm (10"). Weight 348g.


Click to see full product specification

Unique indented channel on the inside of the centre cone acts
as a feel guide and keeps the foot in the perfect position while effortlessly pulling on the compression stocking. The extra wide cone is ideal for people with oedema or larger feet. High sturdy handles reduce the need for bending or stretching. The handles also feature 3 gripping levels to accommodate different heights and hand sizes. Easy to assemble and can be taken apart for travelling or storage. Height 425mm (17"). Width 30mm (12"). Depth 200mm (8").


Click to see full product specification

Designed to help those with restricted mobility, enabling the user to successfully apply on socks. The Brevetti is also very effective used with stockings. It consists of a plastic collar or gutter for holding the garment at one end, and a plastic shoehorn with a notch for easy sock removal at the other. A coated steel tube connects the two. Length 737mm (29"). Weight 386g.


Click to see full product specification